433MHz RF4463F30 1W High Power Ultra Long Range Wireless Front End Transceiver Module FSK GFSK SI4463

Buy 433MHz RF4463F30 1W High Power Ultra Long Range Wireless Front End Transceiver Module FSK GFSK SI4463

Introduction:

 

Using the Silicon Lab Si4463 device, this is a highly integrated wireless ISM band transceiver chip. Extremely low receive sensitivity (-126dBm), combined with industry-leading +30Bm output power guarantees extended range and improved link performance. At the same time, built-in antenna diversity and support for frequency hopping can be used to further expand the range and improve performance.

 

Features:

 

● Frequency range: 433MHz

● Sensitivity up to -126dBm

● Maximum output power: 30dBm

● (G)FSK, 4(G)FSK, (G)MSK

   OOK and ASK modulation mode

● 10mA@ receiving status

● Data transmission rate: 0.1-1000kbps

● 3.3-6.5 V power supply

● Digital Received Signal Strength Indicator (RSSI)

● Timed wake up function

● Antenna automatic matching and bidirectional switch control

● configurable packet structure

● Preamble detection

● 64/128 byte Transceiver Data Register (FIFO)

● Low power detection

● Temperature sensing and 8-bit analog-to-digital converter

● Operating temperature range: -40 ~ +85 °C

● Integrated voltage regulator

● Frequency hopping function

● Built-in crystal adjustment function

● Ultra low power shutdown mode

  

Applications:

 

● Wireless remote control

● Remote meter reading

● Smart home

● Industrial control

● Toy control

● Sensor network

● Tire pressure monitoring

● Health monitoring

Note: (The following parameters are VCC = 5V, connected to the instrument with a 50 ohm copper axis)

Parameter	MIN.	Typical	MAX.	UNIT	Condition
Operating conditions
Operating voltage range	3.3	5	6.5	V
Operating temperature range	-40		85	℃
Current consumption
Receiving current		13.5		mA	High sensitivity mode
		10		mA	Low sensitivity mode
Emission current		500	550	mA	Vcc=5v,Tx=30dBm
Sleep current		≦fgf   <2	3	uA
RF parameters
Frequency Range	410	433	450	MHZ	@433MHZ
	470	490	510	MHz	@470MHz
	863	868	873	MHZ	@868MHZ
Modulation rate	0.1		1000	Kbps	FSK
Maximum transmit power	29.5	30	31	dBm	433MHzV, CC = 5V
Receiving sensitivity	-125	-126		dBm	433MHz@data=600bps,Fdev=3kHZ

Pin Number	Pin Definitions	Description
1	VCC	Positive power supply
2	GND	Connected to power ground
3, 4, 14	NC	Vacant, not connected
5	SDN	Power down control.
		SDN = ls power down SDN = 0. normal working
6	nIRQ	Interrupt output
7	nSEL	Serial data selection for SPI interfaces.
8	GND	Connected to power ground
9	SCLK	Serial data clock for SPI interface.
10	SDI	Serial data in for SPI interface.
11	SDO	Serial data out for SPI interface.
12	GPIOl	GPIOl of Si4463
13	GPIOO	GPIOO of Si4463 for I/O interface
15	GND	Connected to power ground
16	ANT	From 50 ohm coaxial antenna

Note: When the user is in the layout, the GND (15 pin) next to the ANT (16-pin) pin cannot be directly connected to the ground of the system. It can be connected to the GND of the external SMA holder, and between the antenna holder and the module antenna pin. The trace should be as short as possible, the recommended thickness is >1mm

Package includes:

1 x Transceiver Module

433MHz RF4463F30 1W High Power Ultra Long Range Wireless Front End Transceiver Module FSK GFSK SI4463 Buy Now